| Product type | Split seasoned hardwood firewood |
|---|---|
| Species | Oak, beech, ash or mixed hardwood; exact species or blend stated on the quotation |
| Moisture content | ≤ 20% at packing, measured using the agreed method |
| Nominal cut length | 25, 30, 33 or 40 cm; tolerance stated for the ordered product |
| Typical split size | Approximately 5–15 cm across the split face, subject to natural variation |
| Form | Split logs; round pieces only where specifically agreed |
| Bark | Natural bark content and variation according to species and batch |
| Visible condition | Clean product without unacceptable visible rot, excessive mould or foreign material at packing |
| Indicative net calorific value | Approximately 3.8–4.2 kWh/kg at ≤20% moisture, depending on species and measured moisture |
| Packaging | Net bags, stacked crates or buyer-agreed commercial format |
| Quantity declaration | Mass, stacked volume or loose volume basis stated on quotation and packing documentation |
| Storage | Ventilated, covered and protected from rain and ground moisture |
| Traceability | Species and source-lot information supplied where available and contractually required |
Seasoned split hardwood
Firewood
Seasoned split hardwood prepared for heating, hospitality and retail resale. Species, cut length, moisture condition and packing are defined in the commercial offer for the intended market and application.
SpeciesOak / Beech / Ash / mixed hardwood
Moisture≤ 20%
Cut length25 / 30 / 33 / 40 cm
Split sizeApprox. 5–15 cm
- Split, seasoned hardwood with clean visible condition at packing
- Natural bark variation according to species and batch
- Net bags, stacked crates or other agreed commercial formats
- Quantity stated by mass, stacked volume or loose volume as applicable
Full specification
Firewood Technical Specification
The following parameters define the standard commercial product profile. Final order requirements and supplied values are confirmed through the quotation and applicable product documentation.